Pulurobot Open Source published
See presentation and teasers!
4th February 2018, Brussels, Belgium.
The original can be found here: https://fosdem.org/2018/schedule/event/autonomous_robot/
We had room full of interested people
Roughly 250 persons attended to our publication to see what new we offer.
The presentation explains in 21 minutes from where we started, how we got where we are now and what the future may hold.
After the presentation we got a clear message our technology must be fully open source. This means also hardware. This is not simple and straightforward task, we need to make license matrix and understand all components in the device.
The bill of materials is not yet locked fully, due to 3D sensor is not yet ready, we can not make this. We hope to achieve this before summer.
All help with "how to get Open Hardware out" highly appreaciated!
Teaser, Pulu M goes to Brussels - part 1
Teaser, Pulu M gets to brussels - part 2